NDT Conferences
Since many years Delta Test is organising a high qualified technical NDT Conference at intervals of two years as you can see from the listing of lectures and referees of the last two conferences:
Lectures of the NDT Conference 2008:
W. Sievert, Delta Test GmbH, Hambühren
Greeting
Greeting words of the management of the DGZfP (German association for non-destructive inspection)
W. Sievert, Delta Test GmbH, Hambühren
Retrospection on 20 years of Delta Test
R. Vogel, Dr. M. Beller, NDT Systems & Services AG, Stutensee
Combined wall thickness measuring and crack inspection of a gas pipeline with an ultrasonic crawler
Ph.D. T. Vogt, Guided Ultrasonics Ltd., London
Non-destructive inspection with Guided Waves
Delta Test GmbH, Hambühren
Current developments
Presentation of Devices and Demonstration of Devices
Prof. Dr. Mook, Otto-von-Guericke Univ. Magdeburg, Institute for material technique and inspection
Sensor arrays for the recovery of eddy current figures
Dr. J. Pohl, PLR Prüftechnik Linke & Rühe GmbH, Magdeburg
Eddy current inspection of aluminium cast
D. A. Kronemeijer, Shell Global Solutions International B.V., Amsterdam
Rogue Material Detection - Detecting Carbon Steel Inclusions in Stainless Steel Weldings
Dr. H.-M. Thomas, Federal Institute for material research and inspection, Berlin
Premature detection of rolling contact fatigue in railroad tracks by means of eddy current method
D. A. Kronemeijer, Shell Global Solutions International B.V., Amsterdam
Defect Identification in Heat Exchanger Inspection using Encoder Displacement Signals and Complex Plane Evaluation
Dr. H.-J. Salzburger, IZfP, Saarbrücken
Potential and application of the dry ultrasonic inspection of tubes by means of EMUS with the manufacture and in operation
Dr. W. Reimche, Institute for Material Science, University of Hanover
Development and qualification of inspection techniques for the process survey and quality assurance in the manufacture
Lectures of the NDT Conference 2006:
W. Sievert, Delta Test GmbH, Hambühren
Greeting
W. Hueck, DGZfP, Berlin
Greeting words of the management of the DGZfP (German association for non-destructive inspection)
D. A. Kronemeijer, Shell Global Solutions International B.V. Amsterdam
Weldolet inspections at elevated temperatures
Dr. B. Heutling, Delta Test GmbH Hambühren
Mechanized Crack Detection on Austenitic Weld Seams with Eddy Current Technology
U. Rös
Current developments
Presentation / Demonstration of Devices
E. Zeelenberg, Lloyds Register Rotterdam
The Philosophy of Non Destructive Testing
Technical developments in the range of non-destructive material testing with „RTD“
N. Trimborn, SGS Technische Inspecties B.V., Spijkenisse
To make the so far invisible visible – Practical experiences with the application of "Guided Waves"
Dr. J. Pohl, PLR Prüftechnik Linke & Rühe GmbH Magdeburg
ET Training: from inspection assistant to Mast of NDT
Prof. Dr.-Ing. J. Hinken, FI Test and measuring technique GmbH Magdeburg, University of Magdeburg-Stendal (FH)
non-destructive inspection with microwaves on ceramics, Polymer and fiber composite materials
S. Rühe; K. Dilz, PLR Prüftechnik Linke & Rühe GmbH Magdeburg
New device conceptions for eddy current inspection – from specially adapted eddy current inspection instruments in the railroading to inspection devices in other applications
D. A. Kronemeijer, Shell Global Solutions International B.V. Amsterdam
Pit depth Measurements in austenitic pipe work and Verification by other NDE techniques
M. Liebel, Vattenfall Europe Hamburg AG
Application of analysis methods for the characterisation and sizing of results – an overview of qualification and application experiences
U. Rös, Delta Test GmbH Hambühren
Future perspectives